6-1 ISI Journal Papers : [1] S. C. Tripathy, M. Kalantar, and R. Balasubramanian, “Dynamic and stability of wind and diesel turbine generator with superconducting magnetic energy storage unit on an isolated power system”, IEEE Trans. Energy Conversion, vol. 6, no. 4, pp. 579-585, December 1991. [2] S. C. Tripathy, M. Kalantar, and R. Balasubramanian, “Stability simulation and parameter optimization of a hybrid wind-diesel power generation system”, International Journal of Energy Research, vol. 16, no. 1, pp. 31-42, January 1992. [3] S. C. Tripathy, M. Kalantar, and R. Balasubramanian, “Practical simulation of a wind turbine driven self-excited induction generator”, International Journal of Energy Conversion and Management, Elsevier, vol. 33, no. 12, pp. 1063-1072, December 1993. [4] S. C. Tripathy, M. Kalantar, and R. Balasubramanian, “Practical simulation of a wind turbine driven self-excited induction generator”, International Journal of Energy Conversion and Management, Elsevier, vol. 34, no. 3, pp. 187-199, March 1993. [5] S. C. Tripathy, M. Kalantar, and N. D. Rao, “Dynamic and stability of wind stand-alone power system”, International Journal of Energy Conversion and Management, Elsevier, vol. 34, no. 8, pp. 627-640, August 1993. [6] S. C. Tripathy, M. Kalantar, and N. D. Rao, “Wind turbine driven self-excited induction generator”, International Journal of Energy Conversion and Management, Elsevier, vol. 34, no. 8, pp. 641-648, August 1993. [7] F. Karbalaei, S. Jadid, and M. Kalantar, “A novel method for fast computation of saddle node bifurcation in power systems using an optimization technique”, Energy Conversation and Management, Elsevier, vol. 47, no. 5, pp. 582-589, March 2006. [8] F. Karbalaei and M. Kalantar, “Difference in analysis methods of tap changer instability in link and radial network”, International Journal of Energy Conversion and Management, Elsevier, vol. 48, no. 7, pp. 1919-1922, July 2007. [9] F. Karbalaei, M. Kalantar, and A. Kazemi, “Diagnosis of voltage collapse due to induction motor stalling using static analysis”, International Journal of Energy Conversion and Management, Elsevier, vol. 49, no. 2, pp. 151-156, February 2008. [10] M. Gitizadeh and M. Kalantar, “Genetic algorithm based fuzzy multi-objective approach to FACTS devices allocation in FARS regional electric network”, International Journal of Science and Technology, Scientia Iranica, vol. 15, no. 6, pp.534-546, December 2008. [11] M. Gitizadeh and M. Kalantar, “Genetic algorithm-based fuzzy multi-objective approach to congestion management using FACTS devices”, Electrical Engineering Journal, Springer, vol. 90, no. 8, pp. 539-549, February 2009. [12] M. Gitizadeh and M. Kalantar, “A novel approach for optimum allocation of FACTS devises using multi-objective function”, International Journal of Energy Conversion and Management, Elsevier, vol. 50, no. 3, pp. 682-690, March 2009. [13] H. Raoufi and M. Kalantar, “Reactive power rescheduling with generator ranking for voltage stability improvement”, International Journal of Energy Conversion and Management, Elsevier, vol. 50, no. 4, pp. 1129-1135, April 2009. [14] M. Gitizadeh and M. Kalantar, “Optimum allocation of FACTS devices in FARS regional electric network using genetic algorithm based goal attainment”, Journal of Zhejiang University, SCIENCE A, vol. 10, no. 4, pp. 478-487, April 2009. [15] S.M. Mousavi G. and M. Kalantar, "Optimal sizing, economic analysis and dynamic behaviour of an isolated integrated wind turbine, microturbine, and battery storage", International Review of Electrical Engineering, IREE, vol. 4, no. 6, Part A, December 2009, pp. 1231-1242. [16] A.H. Khazali, A. Parizad, and M. Kalantar, "Optimal voltage/reactive control by an improve harmony search algorithm", International Review of Electrical Engineering, IREE, vol. 5, no. 1, Part B, February 2010, pp. 217-224. [17] A. Parizad, A.H. Khazali, and M. Kalantar, "Unbalanced distribution network planning by sitting and sizing of distributed generation and harmonic filter due to losses and THD minimization", International Review of Electrical Engineering, IREE, vol. 5, no. 2, Part B, April 2010. [18] M. Kalantar and S.M. Mousavi G., "Dynamic behavior of a stand-alone hybrid power generation system of wind turbine, microturbine, solar energy, and battery storage", Accepted for publication in Applied Energy, Elsevier. [19] M. Kalantar and S.M. Mousavi G., "Posicast control within feedback structure for a dc-dc single ended primary inductor converter in renewable energy applications", Accepted for publication in Applied Energy, Elsevier. [20] F. Karbalaei, M. Kalantar, and A. Kazemi, "On line diagnosis of capacitor switching effect to prevent voltage collapse", International Journal of Energy Conversion and Management, Elsevier, vol. 51, no. 11, pp. 2374-2382, November 2010. [21] S. Aghajani and M. Kalantar, "Optimal operation of combined wind power generation and pumped-storage units in the electricity markets", International Review of Electrical Engineering, IREE, vol. 5, no. 5, Part B, pp. 2385-2391, October 2010. [22] A. Tofighi and M. Kalantar, "Adaptive passivity-based control of PEM fuel cell/battery hybrid power source for stand-alone applications", Advances in Electrical and Computer Engineering, vol. 10, no. 4, pp. 111-120, 2010. [23] A.H. Khazali and M. Kalantar, "Optimal reactive power dispatch based on harmony search algorithm", Electrical Power and Energy Systems, Elsevier, vol. 33, no. 3, pp. 684-692, March 2011. [24] A.H. Khazali, M. Kalantar, and A. Khazali, "Fuzzy multi-objective reactive power clearing considering reactive compensation sources", Energy, Elsevier, vol. 36, no. 5, pp. 3319-3327, May 2011. [25] A. Tofighi and M. Kalantar, "Power management of PV/battery hybrid power source via passivity-based control", Renewable Energy, Elsevier, vol. 36, no. 9, pp. 2440-2450, September 2011.
6- Journal Papers : [1] M. Kalantar , “Power quality improvement responses of the hybrid wind-diesel turbines”, International Journal of Engineering Science, Iran University of Science and Technology, vol. 9, no. 4, pp. 91-110, 1998. [2] H. Shayanfar, M. Kalantar, and M. Sedighizadeh, “Improving transient stability in Fars and Bushehr network with FACTS devices”, Journal of Faculty of Engineering, Tabriz University, no. 23, pp. 67-77, Autumn and winter 1999. [3] M. Kalantar and M. Azadbakht, “Application of superconducting magnetic energy storage unit for damping dynamic oscillation in power system”, International Journal of Engineering Science, Iran University of Science and Technology, vol. 11, no. 4, pp. 133-149, 2000. [4] M. Kalantar and M. Sedighizadeh, “Decoupled and reduced order of a double cage and deep bar induction motor with two aggregated techniques”, International Journal of Engineering Science, Iran University of Science and Technology, vol. 12, no. 1, pp. 115-130, 2002. [5] M. Kalantar , “Fuzzy system design for optimum placement of an active power line conditioner”, International Journal of Engineering Science, Iran University of Science and Technology, vol. 13, no. 1, pp. 197-207, 2002. [6] M. Kalantar and M. Sedighizadeh, “Load modeling at Bushehr power system network for power flow and stability studies”, International Journal of Engineering Science, Iran University of Science and Technology, vol. 14, no. 1, pp 31-46, 2003. [7] A. Kazemi, M. Kalantar, and F. Karbalaei, “Control of tap-changing transformer for stability studies using sensitivity analysis”, International Journal of Engineering Science, Iran University of Science and Technology, vol. 14, no. 5, pp. 173-184, 2004. [8] A. Halvaei Niasar, A. Kazemi, and M. Kalantar, “Control and Reactive power distribution for double fed induction generator in a wind power station using fuzzy and neural network analysis”, International Journal of Engineering Science, Iran University of Science and Technology, vol. 16, no. 3, pp. 1-9, 2005. [9] M. Kalantar and M. Sedighizadeh, “Reduced order model for doubly output induction generator in wind park using integral manifold theory”, Iranian Journal of Electrical and Electronic Engineering, Iran University of Science and Technology, vol. 1, no. 1, pp. 41-48, Jan. 2005. [10] M. Sedighizadeh and M. Kalantar, “A new model introduction for wind farms using coordination of integral manifolds and iterative separation theory”, Electrical Journal of Scientific Research, vol. 17, no. 42, pp. 49-68, 2005. [11] M. Sedighizadeh and M. Kalantar, “A new model introduction for wind farms using coordination of integral manifolds and iterative separation theory”, Electrical Journal of Scientific Research, vol. 17, no. 42, pp. 49-68, 2005. [12] M. Kalantar and M. Sedighizadeh, “Decoupled, reduced order model for double output induction generator using integral manifolds and iterative separation theory”, International Journal of Engineering, Amirkabir University of Technology, vol. 15, no. 60-2, pp. 23-40, 2005. [13] S. M. Mousavi Badejani, M. A. S. Masoum, and M. Kalantar, “Optimal design and modeling of stand-alone PV-wind hybrid system with adaptive-Fuzzy controller”, Australian Journal of Electrical and Electronic Engineering, vol. 5, no. 1, pp.65-74, 2008. [14] M. Gitizadeh and M. Kalantar, “FACTS devices allocation to congestion alleviation incorporating voltage dependence of loads”, Iranian Journal of Electrical and Electronic Engineering, Iran University of Science and Technology, IJEEE, vol. 4, no. 4, pp. 176-190, October 2008. [15] S. Aghajani, I.A. Joneidi, M. Kalantar, and Mortezapour, "Modeling and simulation of a PV/FC/UC hybrid energy system for stand-alone applications", in International Review of Modeling and Simulations, IREMOS, vol. 3, no. 1, February 2010, pp.82-89. [16] S. Aghajani, I.A. Joneidi, M. Kalantar, and V. Mortezapour, "Modeling and simulation of a PV/FC/UC hybrid energy system for stand-alone applications", in International Review of Modeling and Simulations, IREMOS, vol. 3, no. 1, pp.82-89, February 2010. [17] L. Ghods and M. Kalantar, "Long-term peak demand forecasting by using radial basis function neural networks", Iranian Journal of Electrical & Electronic Engineering, IJEEE, vol. 6, no. 3, pp. 175-182, September 2010. [18] M. Sheidaee and M. Kalantar, "Distributed generation planning optimization using multiobjective evolutionary algorithms", International Journal of Scientific and Engineering Research, IJSER, vol. 2, no. 4, pp. 134-139, April 2011. [19] M. Sheidaee and M. Kalantar, "A comprehensive distributed generation planning optimization with load models", International Journal of Scientific and Engineering Research, IJSER, vol. 2, no. 4, pp. 182-187, April 2011 |
7- Conference papers: [1] M. Kalantar , S. C. Tripathy, and S. S. Murthy, “Single phase self-excited induction generator for non-conventional power generation”, in Proc. International Conference on Modeling and Simulation, IASTED MS1990, Innsbruck, Austria, 19-22 February 1990, pp. 226-229. [2] M. Kalantar , S. C. Tripathy, and S. S. Murthy, “Load characteristics of single-phase self-excited induction generator for non-conventional power generation”, in Proc. International Conference on Control and Modeling, IASTED, Tehran, Iran, 17-20 July 1990. [3] S. C. Tripathy, S. S. Murthy, and M. Kalantar, “3-phase self excited induction generator for wind energy – Analytical technique and experimental results”, in Proc. International Energy Conference and Exposition, ENERGEX, Tripoly, Libya, 25-30 November 1990, vol. 3-XVIII, pp. 29-38. [4] M. Kalantar , S. C. Tripathy, R. Balasubramanian, and S. S. Murthy, “Studies on the use of self-excited induction generator for wind energy conversation”, in Proc. Living in the Green House, ANZSES, Auckland, New Zealand, 28 November-1 December 1990, pp. 343-351. [5] M. Kalantar , S. C. Tripathy, and R. Balasubramanian, “Studies of stability and parameter optimization technique for a wind-diesel turbine generators”, in Proc. Iranian Conference on Electrical Engineering, ICEE94, Tehran, Iran, May 1994, vol. power, pp. 164-173. [6] M. Kalantar , “Future of Energy in Iran”, Workshop on Energy, COMESTECH, Al Ain, UAE, November 1994. [7] M. Kalantar , “Wind energy conversion using a self-excited induction generator”, in Proc. Iranian Conference on Electrical Engineering, ICEE95, Tehran, Iran, May 1995, vol. power, pp. 9-20. [8] M. Kalantar , “A modern wind turbine power conversion system”, in Proc. International Institute for Applied Systems Analysis, IIASA, Laxenburg, Austria, June 1995. [9] M. Kalantar , “Power quality improving responses of the hybrid wind-diesel turbines”, in Proc. International Conference on Energy, Economy, and Environment, IEW/JSER, Osaka, Japan, 25-27 June 1996, pp. 113-122. [10] M. Kalantar , “Wind turbine power plants – System configuration and economic considerations”, in Proc. International Conference on Energy, Economy, and Environment, IEW/JSER, Osaka, Japan, 25-27 June 1996, pp. 123-134. [11] M. Kalantar , “Control and dynamics of wind-diesel turbine generators”, in Proc. International Conference on Modeling and Simulation, IASTED MS1997, Pittsburgh, USA, 15-17 May 1997, pp. 1-6. [12] M. Kalantar , “Superconductors – A high capacity energy storage unit”, in Proc. International Institute for Applied Systems Analysis, IIASA, Laxenburg, Austria, 23-25 June 1997, pp. 1-12. [13] M. Kalantar , “Photovoltaic driven self-excited induction generator”, in Proc. Third International Conference on Solar Electricity, Sharjeh, UAE, 21-25 March 1998. [14] M. Kalantar , “Application of photovoltaic system at maximum power with MPPT, invertors and voltage regulator”, in Proc. Power Plant Industrial Conference, PPIC, Tehran, Iran, 14-15 September 1998, pp. 262-281. [15] M. Kalantar and G.H. Naghizadeh, “Industrial Speed control of induction machines using VVVF”, in Proc. 13th International Power System Conference, PSC98, Tehran, Iran, 9-11 October 1998, pp. 325-334. (in Persian) [16] M. Kalantar and M. Azad-bakht, “Application of SMES for improvement of power system dynamic damping responses”, in Proc. 13th International Power System Conference, PSC98, Tehran, Iran, 9-11 October 1998, pp. 563-570. (in Persian) [17] M. Sedighizadeh and M. Kalantar, “Decoupled and reduced order of an double cage and deep bar induction motor with two aggregated technique”, in Proc. 7th Iranian Conference on Electrical Engineering, ICEE99, Tehran, Iran, 18-20 July 1999, vol. power, pp. 49-56. (in Persian) [18] M. Kalantar , “Superconductors”, in Proc. Second National Energy Congress, Tehran, Iran, 18-20 May 1999, pp. 19-38. [19] M. Kalantar and M. Sedighizadeh, “Data preparation of dynamic load modeling for Bushehr power system network using component based method”, in Proc. 14th International Power System Conference, PSC99, Tehran, Iran, 30 October-1 November 1999, pp. 152-163. (in Persian) [20] M. Sedighizadeh and M. Kalantar, “Static and dynamic load modeling of Bushehr network for load flow and stability studies”, in Proc. 14th International Power System Conference, PSC99, Tehran, Iran, 30 October-1 November 1999, pp. 200-210. (in Persian) [21] A. Kazemi, M. Kalantar, and F. Karbalaei, “Analysis of voltage instability in power system using simulation and sensitivity”, in Proc. 15th International Power System Conference, PSC2000, Tehran, Iran, 6-8 November 2000, pp. 43-51. (in Persian) [22] M. Sedighizadeh, H.A. Shayanfar, and M. Kalantar, “Transient stability improvement of Fars and Boshehr network using FACTS devices”, in Proc. 15th International Power System Conference, PSC2000, Tehran, Iran, 6-8 November 2000, pp. 233-241. (in Persian) [23] M. Kalantar , “Active power line conditioner optimum placement using Fuzzy controller”, in Proc. 2001 Joint 9th IFSA Word Congress and 20th NAFIPS International Conference, Vancouver, Canada, 25-28 July 2001, pp. 245-250. [24] M. Kalantar and A. Kolahchi, “Fuzzy system design for optimum placement of an APLC”, in Proc. 16th International Power System Conference, PSC2001, Tehran, Iran, 22-24 October 2001, pp. 13-20. (in Persian) [25] M. Kalantar and J. Jiang, “Power generation using photovoltaic induction generator in an isolated power network”, in Proc. 16th International Power System Conference, PSC2001, Tehran, Iran, 22-24 October 2001, pp. 15-19. [26] M. R. Jahed Motlagh, M. Kalantar, and M. Sedighizadeh, “Application of H-infinity damping controller at Bandarabbas power station”, in Proc. 16th International Power System Conference, PSC2001, Tehran, Iran, 2001, pp. 79-85. [27] M. Kalantar , M. Sedighizadeh, and M. Ahmadipour, “Selection between batteries and fuel cells for PV power backup”, in Proc. 17th International Power System Conference, PSC2002, Tehran, Iran, 2002, vol. 3, pp. 19-25. [28] M. Kalantar , M. Sedighizadeh, and S. Sedighizadeh, “Environmental evaluation of the PV-fuel cell hybrid power plant”, in Proc. 17th International Power System Conference, PSC2002, Tehran, Iran, 2002, vol.8, pp. 41-45. [29] M. Kalantar and M. Mirzaie, “Possibility of using tap-changerless transformer in distribution network”, in Proc. 2nd Special Congress on Transformers, Zanjan, Iran, 2002, pp. 227-291. (in Persian) [30] M. Kalantar and S. Jelodarzadeh, “Simulation of LFC in deregulated power systems”, in Proc. 11th Iranian Conference on Electrical Engineering, ICEE2003, Shiraz, Iran, 6-8 May 2003, vol. 4, pp. 49-56. (in Persian) [31] M. Kalantar , “Hierarchical fuzzy system controller for an active power line conditioner”, in Proc. International Universities Power Engineering Conference, UPEC2002, Stafford, United Kingdom, 9-11 September 2002, pp. 52-56. [32] M. Kalantar and M. Sedighizadeh, “Comparison between batteries and fuel cells and environmental evaluation of the PV-Fuel cell hybrid power plant”, in Proc. International Universities Power Engineering Conference, UPEC2003, Thessaloniki, Greece, 1-3 September 2003, pp. 577-580. [33] M. Sedighizadeh, M. Kalantar, M. R. Dadashzadeh, S. Sabbagh, A. A. Mohseni, “Load modeling for power flow and transient stability computer studies with load mod software”, in Proc. 18th International Power System Conference, PSC2003, Tehran, Iran, 2003, pp. 1-12. [34] M. Gholamrezaeei, M. A. S. Masoum, and M. Kalantar, “Parallel combination of passive and hybrid filters for harmonic mitigation”, in Proc. 18th International Power System Conference, PSC2003, Tehran, Iran, 2003, pp. 7-15. [35] M. Sedighizadeh and M. Kalantar, “A wind park reduced order model using integral manifold theory”, in Proc. International Conference on Modeling, Identification and Control, IASTED MIC2004, Grindelwald, Switzerland, 23-25 February 2004, pp. 281-286. [36] M. Kalantar and S. Sedighizadeh, “Decoupled and reduced order for double cage and doubly output induction generator in a wind park using integral manifold theory”, in Proc. 12th Iranian Conference on Electrical Engineering, ICEE2003, Mashhad, Iran, 11-13 May 2003, vol. 1, pp. 252-259. (in Persian) [37] A. Halvaei Niasar, A. Kazemi, H. Moghbeli, and M. Kalantar, “Control and reactive power distribution for double fed induction generator in a wind power station with fuzzy and neural network technique”, in Proc. 12th Iranian Conference on Electrical Engineering, ICEE2003, Mashhad, Iran, 11-13 May 2003, vol. 1, pp. 272-279. (in Persian) [38] M. Sedighizadeh and M. Kalantar, “Adaptive self turning control of wind energy conversion system using morlet mother wavelet basis functions networks”, in Proc. IEEE Conference on Control and Automation, MED04, Kusadasi, Turkey, 6-9 June 2004. [39] S. Talebi Rafsanjani, M. Sedighizadeh, M. Kalantar, and M. C. Dadashzadeh, “Load modeling for power flow and transient stability computer studies with LOADMOD software”, in Proc. International Conference on Applied Simulation and Modeling, IASTED ASM2004, Rhodes, Greece, 28-30 June 2004, pp. 522-527. [40] M. Sedighizadeh and M. Kalantar, “A new model for doublet output induction generator with two rotor circuits”, in Proc. International Conference on Applied Simulation and Modeling, IASTED ASM2004, Rhodes, Greece, 28-30 June 2004, pp. 522-527. [41] M. Sedighizadeh and M. Kalantar, “Adaptive PID control of wind energy conversion system using wavelets”, in Proc. International Universities Power Engineering Conference, UPEC2004, Bristol, United Kingdom, 6-8 September 2004, vol. 1, pp. 299-303. [42] M. Kalantar and M. Sedighizadeh, “Harmonic analysis and performance improvement of a wind driven double output induction generator”, in Proc. International Universities Power Engineering Conference, UPEC2004, Bristol, United Kingdom, 6-8 September 2004, vol. 1, pp. 664-668. [43] F. Karbalaei, S. Jadid, and M. Kalantar, “A novel method for fast computation of saddle-node bifurcation in power systems using an optimization technique”, in Proc. 19th International Power System Conference, PSC2004, Tehran, Iran, 22-24 November 2004. [44] M. Kalantar and M. Sedighizadeh, “Introducing a new technique for double output induction generator starting in a wind farm using aggregated model”, in Proc. 19th International Power System Conference, PSC2004, Tehran, Iran, 22-24 November 2004. (in Persian) [45] M. Sedighizadeh and M. Kalantar, “A new approach for control of wind energy conversion systems”, in Proc. 19th International Power System Conference, PSC2004, Tehran, Iran, 22-24 November 2004. [46] D. Arzaghi Harris, M. Sedighizadeh, and M. Kalantar, “A new model for double output induction generator in wind farm using integral manifold theory”, in Proc. 2004 IEEE Region 10 Conference, TENCON2004, Chiang Mai, Thailand, 21-24 November 2004, vol. 3, pp. 456-459. [47] M. Sedighizadeh, D. Arzaghi Harris, and M. Kalantar, “Adaptive PID control of wind energy conversation systems using RASP1 mother wavelet basis function networks”, in Proc. 2004 IEEE Region 10 Conference, TENCON2004, Chiang Mai, Thailand, 21-24 November 2004, vol. 3, pp. 524-527. [48] A. Kazemi, M. Kalantar, and Davood Talebi-Khanmiri, “Introducing a new index for voltage stability analysis in a radial distribution network in the presence of DSTATCOM”, in Proc. 10th Eclectic Power Distribution Conference, EPDC2005, Tabriz, Iran, May 2005, pp. 257-264. (in Persian) [49] S. M. Mousavi Badejani, M. A. S. Masoum, and M. Kalantar, “Design of isolated hybrid wind and photovoltaic power systems”, in Proc. 13th Iranian Conference on Electrical Engineering, ICEE2005, Zanjan, Iran, 10-12 May 2005, vol. 4, pp. 67-72. (in Persian) [50] M. Kalantar , A. Kazemi, and A. Tajfar, “Coordinated fuzzy control of cascaded tap changers in distribution network”, in Proc. Iranian Conference on Electrical Engineering, ICEE2005, Zanjan, Iran, 10-12 May 2005, vol. 4, pp. 775-781. [51] M. Kalantar , N. M. Tabatabaei, and M. Rashidi, “Control and simulation of fault and change effect in a back to back system of high voltage direct current network”, in Proc. International Conference on Fizika-2005, Baku, Azerbaijan, 7-9 June 2005, pp. 473-476. [52] M. Kalantar and M. Sedighizadeh, “Adaptive-neural PID control of wind energy conversion systems using wavenets”, in Proc. 2005 IEEE International Symposium on Intelligent Control, and Mediterranean Conference on Control and Applications, MED05, Limassol, Cyprus, 27-29 June 2005, pp. 456-459. [53] M. Sedighizadeh, M. Kalantar, S. Esfandeh, and D. Arzaghi Harris, “Nonlinear model identification and control of wind turbine using wavelets”, in Proc. IEEE Conference on Control Applications, Toronto, Canada, 28-31 August 2005, pp. 1057-1062. [54] A. Kazemi, M. Kalantar, and F. Karbalaei, “A new approach to control static var compensators for damping of small-signal oscillations using bang-bang control method”, in Proc. International Universities Power Engineering Conference, UPEC2005, Cork, Ireland, 2005. [55] A. K. Jalali, M. Gitizadeh, and M. Kalantar, “A new approach for robust stabilizing controller in an interconnected power system using LMIS”, in Proc. International Universities Power Engineering Conference, UPEC2005, Cork, Ireland, 2005. [56] S. Jamali, M. Kalantar, and H. Shateri, “Effects of instrument transformers location on measured impedance by distance relay in presence of UPFC”, in Proc. 2006 IEEE Power India Conference, New Delhi, India, 10-12 April 2006. [57] Davood Talebi-Khanmiri, M. Kalantar, R. Zakerifar, and H. Sardari “Optimal distribution of reactive power using improved genetic algorithm for network loss reduction”, in Proc. 11th Eclectic Power Distribution Conference, EPDC2006, Mazandaran, Iran, 2-3 May 2006, pp. 359-365. (in Persian) [58] M. Kalantar , S. A. Kamali, A. Babaei, A. Vahedi, and A. Gholami, “A Novel technique improving PSS in multi machine power system using genetic algorithm”, in Proc. 14th Iranian Conference on Electrical Engineering, ICEE2006, Tehran, Iran, 16-18 May 2006. (in Persian) [59] A. Amini, H. A. Shayanfar, M. Kalantar, and M. Fotouhi Firoozabad, “Reliability analysis of distribution networks with presence of dispersed generation unit”, in Proc. 14th Iranian Conference on Electrical Engineering, ICEE2006, Tehran, Iran, 16-18 May 2006. (in Persian) [60] A. Kazemi, S. M. Mousavi Badejani, and M. Kalantar, “Synthetic application of FPSS and TCSC for improvement of voltage and current profiles in electrical power systems”, in Proc. IEEE Conference on Industrial Electronics and Applications, ICIEA2006, Singapor, 24-28 May 2006. [61] M. Kalantar , Rahman Dashti, and Reza Dashti, “Combination of Network Reconfiguration and Capacitor Placement for Loss Reduction in Distribution System with Based Genetic Algorithm”, in Proc. 41st International Universities Power Engineering Conference, UPEC2006, Newcastle, UK, 6-8 September 2006, pp. 308-312. [62] Rahman Dashti, M. Kalantar and Reza Dashti, “Introducing a novel aggregated technique for loss reduction in distribution networks”, in Proc. 21st International Power System Conference, PSC2006, Tehran, Iran, 13-15 November 2004, pp. 1205-1212. (in Persian) [63] Rahman Dashti, M. Kalantar and Reza Dashti, “Introducing a new technique for reconfiguration of distribution networks for loss reduction”, in Proc. 1st Energy Consuming Optimization Congress, Iran, pp. 1-9. (in Persian) [64] M. Gitizadeh and M. Kalantar, “A new approach for optimal location of TCSC in a power system to enhance voltage stability: steady state studies”, in Proc. 42nd International Universities Power Engineering Conference, UPEC2007, Brighton, UK, 4-6 September 2007, pp. 570-575. [65] H. Raoufi and M. Kalantar, “Reactive power rescheduling with generator ranking for improving voltage stability margin”, in Proc. Conference on Power Engineering, 2007 Large Engineering Systems, LESCOPE2007, Montreal, Quebec, Canada, 10-12 October 2007, pp. 218-225. [66] F. Karbalaei, M. Kalantar, and A. Kazemi, “On line diagnosis of tap changing action effects based on the concept of attraction region”, in Proc. 8th International Power Engineering Conference, IPEC2007, Singapore, 3-6 December 2007. [67] F. Karbalaei, M. Kalantar, and A. Kazemi, “A novel method for emergency voltage control”, in Proc. Australasian Universities Power Engineering Conference, AUPEC07, Perth, Australia, 9-12 December 2007, pp. 271-276. [68] V. Salehi, S. Aslanzadeh, and M. Kalantar, “Maintaining of islanding condition of distributed generation for redial distribution system by D-STATCOM”, in Proc. Australasian Universities Power Engineering Conference, AUPEC07, Perth, Australia, 9-12 December 2007, pp. 471-477. [69] S. M. Mousavi Badejani, M. A. S. Masoum, and M. Kalantar, “Optimum Design and Modeling of Stand-Alone Hybrid PV-Wind Systems”, in Proc. Australasian Universities Power Engineering Conference, AUPEC07, Perth, Australia, 9-12 December 2007, pp. 894-900. [70] M. Gitizadeh and M. Kalantar, “A new approach for congestion management via optimal location of FACTS devices in deregulated power systems”, in Proc. Third International Conference on Electric Utility Deregulation and Restructuring and Power Technologies, DRPT2008, Nanjing, China, 6-9 April 2008, pp. 1592-1597. [71] L. Ghods and M. Kalantar, “Methods for long-term electric load demand forecasting: A comprehensive investigation”, in Proc. IEEE International Conference on Industrial Technology, ICIT2008, Chengdu, China, 21-24 April 2008. [72] A. R. Tajfar, M. Kalantar, R. Iravani, and K. Zare, “Coordinated fuzzy logic voltage/var controller in distribution networks”, in Proc. IEEE International Conference on Industrial Technology, ICIT2008, Chengdu, China, 21-24 April 2008. [73] O. Gholami Ghasri, S. Jamali, and M. Kalantar, “Optimal distribution networks reconfiguration for loss reduction using improved genetic algorithm”, in Proc. 13th Eclectic Power Distribution Conference, EPDC2008, Gilan, Iran, 30 April-1 May 2006, pp. 359-365. (in Persian) [74] N. Sharafdoost, S. Jamali, and M. Kalantar, “Use of controlled hybrid power converter for islanding detection”, in Proc. 16th Iranian Conference on Electrical Engineering, ICEE2008, Tehran, Iran, 13-15 May 2008. (in Persian) [75] H. Raoufi and M. Kalantar, “Reactive power rescheduling with generator ranking for voltage stability improvement”, in Proc. 2008 IEEE/PES General Meeting, IEEE/PES GM2008, Pittsburg, Pennsylvania, USA, 20-24 July 2008. [76] S. Jamali, M. Kalantar, and H. Shateri, “Effects of SMES equipped STATCOM on distance relay ideal tripping characteristic”, in Proc. IEEE/PES Transmission and Distribution Conference and Exposition, T&D Latin America 2008, Bogota, Colombia, 13-15 August 2008. [77] M. Gitizadeh and M. Kalantar, “A new approach for FACTS devices allocation to enhance voltage stability using sensitivity based genetic algorithm”, in Proc. 43rd International Universities Power Engineering Conference, UPEC2008, Padova, Italy, 1-4 September 2008. [78] M. Kalantar and P. Poushang Baghery, “Comparison of dynamic behavior of doubly fed induction generator and induction generator during grid faults”, in Proc. 4th International Conference on Technical and Physical Problems of Power Engineering, TPE2008, Pitesti, Romania, 4-6 September 2008, pp. II - 68-72. [79] M. Kalantar , M. Rashidi, N. Samsunchi, and A. Kazemi, “ Research of using (BBPLC) Broad Band Power Line Communication in power networks ”, in Proc. 4th International Conference on Technical and Physical Problems of Power Engineering, TPE2008, Pitesti, Romania, 4-6 September 2008, pp. III - 25-29. [80] M. Rashidi, M. A. Gaffarzadeh F., S. Hosseinzadeh, M. Kalantar, “Energy storage systems in power networks”, in Proc. 4th International Conference on Technical and Physical Problems of Power Engineering, TPE2008, Pitesti, Romania, 4-6 September 2008, pp. III - 43-47. [81] P. Baghery and M. Kalantar, “Evaluating of voltage stability in power systems with IG and DFIG wind turbines”, in Proc. 40th North American Power Symposium, NAPS 2008, Calgary, Alberta, Canada, 28-30 September 2008. [82] M. Kalantar , S. Jamali, and H. Shateri, “Measured impedance for faults on line behind and second circuit of a double circuit line”, in Proc. 40th North American Power Symposium, NAPS 2008, Calgary, Alberta, Canada, 28-30 September 2008. [83] M. Kalantar , M. Daoodabadi and S. Jamali, “Distribution networks reconfiguration using graph theory for loss reduction”, in Proc. 17th Iranian Conference on Electrical Engineering, ICEE2009, Tehran, Iran, 10-12 May 2009, vol. 2, pp. 300-309. (in Persian) [84] H. Raoufi and M. Kalantar, “Use of generators ranking for improving voltage stability margin”, in Proc. 17th Iranian Conference on Electrical Engineering, ICEE2009, Tehran, Iran, 10-12 May 2009, vol. 2, pp. 324-329. (in Persian) [85] M. Ranjbar, M. Kalantar , and A.R. Jalilian, “A Parallel Hybrid Filter with a Novel Control Strategy for Power Quality Improvement”, in Proc. 17th Iranian Conference on Electrical Engineering, ICEE2009, Tehran, Iran, 10-12 May 2009, vol. 2, pp. 518-523. [86] M. Kalantar , S. Jamali, and H. Shateri, “Load flow method for distribution networks with dispersed generation units”, in Proc. 44th International Universities Power Engineering Conference, UPEC2009, Glasgow, Scotland, 1-4 September 2009. [87] S. M. Mousavi G. and M. Kalantar , “Supervisory and adaptive controllers for extraction of maximum energy in a stand-alone variable speed wind turbine”, in Proc. 5th International Conference on Technical and Physical of Power Engineering, TPE2009, Bilbao, Spain, 3-5 September 2009. [88] S.M.S. Ghiyasi and M. Kalantar, “Novel technique for wind speed prediction of wind farms”, in Proc. 24th International Power System Conference, PSC2009, Tehran, Iran, 16-19 November 2009. [89] A. Tofighi and M. Kalantar, “Determination of electrical parameters of PV considering dynamic thermal model”, in Proc. 24th International Power System Conference, PSC2009, Tehran, Iran, 16-19 November 2009. [90] A. Tofighi and M. Kalantar, “Analysis dynamic thermal model of PV module using electrical circuits”, in Proc. 24th International Power System Conference, PSC2009, Tehran, Iran, 16-19 November 2009. [91] A.H. Khazali and M. Kalantar, “Reactive/voltage control by A multi-agent based PSO approach considering voltage stability”, in Proc. 24th International Power System Conference, PSC2009, Tehran, Iran, 16-19 November 2009. [92] A.H. Khazali and M. Kalantar, “Reactive/voltage control by A multi-agent based PSO approach considering voltage stability”, in Proc. 24th International Power System Conference, PSC2009, Tehran, Iran, 16-19 November 2009. [93] A. Tofighi and M. Kalantar, “Thermal model of photovoltaic systems and temperature impact on electrical parameters”, in Proc. 13th Middle East Power Systems Conference, MEPCON2009, Assiut University, Egypt, December 20-23, 2009, pp.413-419. [94] S. Dehghan, H. Sabouri, M. kalantar, and A. Kazemi, “Application of differential evolution algorithm to design a hydrogen-based wind/PV considering reliability indices”, in Proc. First Iranian Conference on Renewable Energies and Distributed Generation, ICREDG2010, Birjand, Iran, 9-11 March 2010. [95] A. Parizad, A.H. Khazali, and M. kalantar, “Distributed generation effects on unbalanced distribution network losses considering cost and security indices”, in Proc. First Iranian Conference on Renewable Energies and Distributed Generation, ICREDG2010, Birjand, Iran, 9-11 March 2010. [96] A.H. Khazali, A. Parizad, and M. kalantar, “Optimal reactive/voltage control by an improved harmony search algorithm”, in Proc. 23rd Canadian Conference on Electrical and Computer Engineering, CCECE 2010, Calgary, Canada, 2-5 May 2010. [97] A. Parizad, A.H. Khazali, and M. kalantar, “Sitting and sizing of distributed generation through harmony search algorithm for improve voltage profile and reduction of THD and losses”, in Proc. 23rd Canadian Conference on Electrical and Computer Engineering, CCECE 2010, Calgary, Canada, 2-5 May 2010. [98] A.H. Khazali, A. Parizad, and M. kalantar, “Optimal reactive/voltage control by an improved harmony search algorithm”, in Proc. 23rd Canadian Conference on Electrical and Computer Engineering, CCECE 2010, Calgary, Canada, 2-5 May 2010. [99] A. Parizad, A.H. Khazali, and M. kalantar, “Sitting and sizing of distributed generation through harmony search algorithm for improve voltage profile and reduction of THD and losses”, in Proc. 23rd Canadian Conference on Electrical and Computer Engineering, CCECE 2010, Calgary, Canada, 2-5 May 2010. [100] A. Parizad, A.H. Khazali, and M. Kalantar, “Sitting and sizing of distributed generation through harmony search algorithm for improve voltage profile and reduction of THD and losses”, in Proc. 23rd Canadian Conference on Electrical and Computer Engineering, CCECE 2010, Calgary, Canada, 2-5 May 2010, pp. 1-7. [101] A. Parizad, A.H. Khazali, and M. Kalantar, “Optimal placement of distributed generation with sensitivity factors considering voltage stability and losses indices”, in Proc. 18th Iranian Conference on Electrical Engineering, ICEE 2010, Isfahan, Iran, 11-13 May 2010, pp. 847-854 [110] M. Aghasi, V. Faraji, D. Arab-Khaburi, and M. Kalantar, “Direct power control for doubly-fed induction generator using indirect matrix converters”, in Proc. 25th International Power System Conference, PSC2010, Tehran, Iran, 8-10 November 2010. [102] A. Ghaderi and M. Kalantar, “Load parameters effect on relays performance for islanding detection”, in Proc. 25th International Power System Conference, PSC2010, Tehran, Iran, 8-10 November 2010. [103] A. Ghaderi and M. Kalantar, “Investigation of influential factors on passive islanding detection methods of inverter based distributed generation”, in Proc. 2nd Power Electronics, Drive Systems & Technology, PEDST011, Tehran, Iran, 16-17 February 2011. [104] M. Choobineh and M. Kalantar, “Introduction of a novel operational framework for distribution network considering distributed generations and load elasticity effect”, in Proc. 16th Conference on Electrical Power Distribution Networks, EPDC2011, Bandarabbas, Iran, 19-20 April 2011, pp. 1-6. [105] A. Ghaderi, A. Esmaeilian, and M. Kalantar, “A novel islanding detection method for constant current inverter based distributed generations”, in Proc. 10th International Conference on Environment and Electrical Engineering, EEEIC2011, Rome, Italy, 8-10 May 2011, pp. 1-4. [106] A. Tofighi and M. Kalantar, “Modeling and simulation of photovoltaic cell considering dynamic thermal model”, in Proc. 19th Iranian Conference on Electrical Engineering, ICEE2011, Tehran, Iran, 17-19 May 2011, pp. 1-6. [107] A.H. Khazali, A. Parizad, M. Asgari, H. Golzar, and M. Kalantar, “Fuzzy multi-objective reactive power clearing by a fuzzy adaptive PSO approach”, in Proc. 19th Iranian Conference on Electrical Engineering, ICEE2011, Tehran, Iran, 17-19 May 2011, pp. 1-6. [108] M. Choobineh and M. Kalantar, “A multiobjective optimization model for short term operation of distribution network in the presence of distributed generation”, in Proc. International Conference on Clean Electrical Power, ICCEP11, Ischia, Italy, 14-16 June 2011. |